Solar Cells, Solar Panel: 2011-07-17

Saturday, July 23, 2011

OUMEIDE Monocrystalline Solar Panels 120w

Product name: OUMEIDE Solar Panel
Material: monocrystalline solar silicone cells
Peak power: 120W
Power output tolerance: 3%
Characteristics:
Use high quality solar cells to advanced encapsulation. Each crystalline silicon cells is inspected and matched according to their power output.
Adopt high transparent low-iron tempered glass, high quality anti-UV EVA and back sheet.
With multi-ply performance testing for each module, to ensure the product quality and output performance.
Using anodization aluminum frame with anticorrosion, to ensure solar module working under extremely and badly outdoors environment.
Each module is individually tested under calibrated solar simulator.
Lightweight and pre-drilled mounting holes for easy installation.
Water-resistant junction box.
Designed specially to meet customers demands for residential, commercial and industrial use.
q0-gsdg
Warranty:
Guarantee the workmanship for 3 years
90% power output for 10years
80% power output for 25years.
Production application:

Independent power supply for remote area, I. E. House lighting, etc.
Solar power system Solar lighting, I. E. Solar garden lamp, solar lawn lamp, etc.
Other samll solar power supply.
For large projects.

For large quantities we can arrange production of custom sizes (cell array configuration) and voltage/amp characteristics.

OUMEIDE Monocrystalline Solar Panels 120w

Product name: OUMEIDE Solar Panel
Material: monocrystalline solar silicone cells
Peak power: 120W
Power output tolerance: 3%
Characteristics:
Use high quality solar cells to advanced encapsulation. Each crystalline silicon cells is inspected and matched according to their power output.
Adopt high transparent low-iron tempered glass, high quality anti-UV EVA and back sheet.
With multi-ply performance testing for each module, to ensure the product quality and output performance.
Using anodization aluminum frame with anticorrosion, to ensure solar module working under extremely and badly outdoors environment.
Each module is individually tested under calibrated solar simulator.
Lightweight and pre-drilled mounting holes for easy installation.
Water-resistant junction box.
Designed specially to meet customers demands for residential, commercial and industrial use.
0
Warranty:
Guarantee the workmanship for 3 years
90% power output for 10years
80% power output for 25years.
Production application:

Independent power supply for remote area, I. E. House lighting, etc.
Solar power system Solar lighting, I. E. Solar garden lamp, solar lawn lamp, etc.
Other samll solar power supply.
For large projects.

For large quantities we can arrange production of custom sizes (cell array configuration) and voltage/amp characteristics.

OUMEIDE Monocrystalline Solar Panels 120w

Product name: OUMEIDE Solar Panel
Material: monocrystalline solar silicone cells
Peak power: 120W
Power output tolerance: 3%
Characteristics:
Use high quality solar cells to advanced encapsulation. Each crystalline silicon cells is inspected and matched according to their power output.
Adopt high transparent low-iron tempered glass, high quality anti-UV EVA and back sheet.
With multi-ply performance testing for each module, to ensure the product quality and output performance.
Using anodization aluminum frame with anticorrosion, to ensure solar module working under extremely and badly outdoors environment.
Each module is individually tested under calibrated solar simulator.
Lightweight and pre-drilled mounting holes for easy installation.
Water-resistant junction box.
Designed specially to meet customers demands for residential, commercial and industrial use.
q0-.sfvxcvV
Warranty:
Guarantee the workmanship for 3 years
90% power output for 10years
80% power output for 25years.
Production application:

Independent power supply for remote area, I. E. House lighting, etc.
Solar power system Solar lighting, I. E. Solar garden lamp, solar lawn lamp, etc.
Other samll solar power supply.
For large projects.

For large quantities we can arrange production of custom sizes (cell array configuration) and voltage/amp characteristics.

Outdoor A-Si thin-film solar cells, mini solar panels, solar cells

Outdoor A-Si thin-film solar cells are widely used in the field of solar lights, solar chargers and outdoor portable power etc

According to the requirement of the customers and the detailed situation, like the load parameters of load resistance, working voltage, current, we can design and determine the area of the solar cells and the unit number of series connection.
2. Outdoor A-Si solar cell can absorb various light sources like scattered light, reflected light and direct light, etc. very well.
3. Outdoor A-Si solar cells can make sure that the photoelectric conversion has a long time, because they have a wide range demand for the sunlight angle on the solar panel. Even in the consecutive days of rain, the outdoor A-Si solar cells can output the currency stably.
4. Outdoor A-Si solar cells have no semiconductor effect, and it will not reduce the power generation efficiency when the solar cells have been in the sunlight for a long time. Compared with crystalline silicon, the A-Si has higher utilization ratio and are more suitable for various areas including the tropical regions
5. Application
Outdoor A-Si thin-film solar cells are widely used in the field of solar lights, solar chargers and outdoor portable power, such as lawn lamps, garden lamps, landscape lamps, traffic lights, etc.
6. Standard test condition: (AM1.5, 1000 W/ m², t 25ºC)
7. Working conditions: Generally speaking, by means of welding method with wire, its easy to link the electric appliances with solar cells

Outdoor A-Si thin-film solar cells

solar cells
CE,RoHS, ISO
Amorphous silicon film-thin solar cells
QFsolar cells
According to the requirement of the customers and the detailed situation, like the load parameters of load resistance, working voltage, current, we can design and determine the area of the solar cells and the unit number of series connection.
2. Outdoor A-Si solar cell can absorb various light sources like scattered light, reflected light and direct light, etc. very well.
3. Outdoor A-Si solar cells can make sure that the photoelectric conversion has a long time, because they have a wide range demand for the sunlight angle on the solar panel. Even in the consecutive days of rain, the outdoor A-Si solar cells can output the currency stably.
4. Outdoor A-Si solar cells have no semiconductor effect, and it will not reduce the power generation efficiency when the solar cells have been in the sunlight for a long time. Compared with crystalline silicon, the A-Si has higher utilization ratio and are more suitable for various areas including the tropical regions
5. Application
Outdoor A-Si thin-film solar cells are widely used in the field of solar lights, solar chargers and outdoor portable power, such as lawn lamps, garden lamps, landscape lamps, traffic lights, etc.
6. Standard test condition: (AM1.5, 1000 W/ m², t 25ºC)
7. Working conditions: Generally speaking, by means of welding method with wire, its easy to link the electric appliances with solar cells

Outdoor LED Camping Lantern with Solar Panel

LED Camping Lantern
1.With 3W solar panel
2.With CE&ROHS
3.36pcs super bright LED
4.Can charge for mobile,ipod,mp3 etc
LED Camping Lantern with Solar Panel
Product Details:
1.Body material:ABS plastic
2.Light source: 36pcs LED/72pcs
3. Solar panel power: 9V/3W, 7V/3W
4.Input: 110-240V regular mains power electricity
5.Battery mode:1 pc 6V/2.5MAH / 4V/3MAH Lead-acid battery
6.Demension:19*17*32.5cm
7.Packaging details:1pcs/color box.8pcs/ctn.
Ctn size:79*36*34mm
8.G.N Weight:17.2/16kg
FCL20':2,016PCS
FCL40':4,320PCS

Features:
1. Portable LED light with an integrated solar panel, easy to take and us
2.
Aluminum disk is good for heat spread from LED base
3.
Adjustable brightness to meet your lighting hours requirements
Applications:
1.You can take it when you are camping, boating, fishing etc, it is easy to carry.
2.CE and ROHS are approved, and OEM is available.
Manufacturer profile:
As a newly high-tech enterprise, Nengfa Electronics Technology Co.,Ltd. is dedicated to solar products and lighting application R&D, produce, sales, technical support and service. Our factory was established in 2002. We have set up a team of professional technicians, we own advanced management systems, comprehensive industry-leading technology and proprietary core technology. Hope our good quality product and the most competitive price can help us to enter a into direct business relations at an early date.
Our products mainly including Solar Panel, Solar Camping Lantern, Solar Bags, Solar Fans, and other kind of solar products. Our products are exported to many countries and regions in the world, such as Europe, North America, South Asia, Mid-East, Japan and Hong Kong. With the business concept and service principle of “Quality is first, customer service is supreme”, we have won a good reputation from our partners relying on our high quality products, competitive prices, prompt delivery time and best services.

P15W SOLAR PANEL

P10W SOLAR PANEL
Long life span solar panel
CE RoSH certificate solar panel
Maximum power:15W panel
Cell size:78*39mm
Polycrystal PV Module
Model NO:CN-DC02, P15W
Electrical charcteristics
Maximum power:15W
Power tolerance:±3%
Optimum operation voltage:16.5Vm(V)
Optimum operation current:0.91 Im(A)
Open circuit voltage:21.6Voc(V)
Short circuit current:1.0 Isc(A)
Maximum system voltage:900(VDC)
Cell efficiency:14.2%
Module efficiency:10.6%
Cell Qty,type,arrangement:36pcs mono crystalline cell(3*12)
Cell size:78*39mm
Bypass diade:1pcs
Temp. coefficient power:-0.45(%/°C)
Temp. coefficient Voc:0.05(%/°C)
Temp. coeffieient Isc:-0.35(%/°C)
Nominal Operating cell temp.:47±2°C
Standard test condition:1000Wsq.m,25°C,AM1.5
Mechanical characteristics:
Size:530*275*25mm
Junction box:VI/VII
Weight:2.3kg
Glass:High transmission of light, low iron, tempred glass
Packing means:
Qty/CTN:5pcs
Ctn box size:545*150*300mm
Absolute maximum ratings:
Dielectric isolation voltage:2000MAX(VDC)
Operating temperature:-40--+85°C
Strorage temperature:-40--+85°C
Maximum wind resistance:60(m/s)
Maximum hail diameter @80Km/h:25mm
Maximum load capacity:200(kg/m)
Quality guarantee:
5 years guarantee, output power 90% in 10 years,80% in 25 years.

P3346 solar panel

Competitive price
*Adhere strickly to ISO quality control
*25year warranty
Macro-Solar is a manufacturer of mono& poly solar panel and other solar application products. We can offer you both mono and poly PV module from 0.01W to 280W.Macro-Solar is specialized in producing mono& poly laminated solar panels and epoxy solar panels with all size, we also have R&D department in order to research new technology of solar panels and devote to satisfy customers demand. Here all kind of customers solar panels be welcome.
Our solar panels are designed for large electrical power requirements.

We provide 2 years Full warranty on the material and workmanship, and a performance warranty of 90% of the minimal rated power output(Pmpp+/-5%)during the first ten years and 80% during twenty-five years.

Ideal for grid-connected and remote power systems, PV modules offer high usable power per square foot of solar array.

*Solar cell:
High efficiency crystalline solar cell 15.5%. Even if under the weak light, the solar panel can produce maximum power output.
*Tempered glass:
Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of PV modules.
*Using EVA and TPT to prevent destroying and water.
l Frame: Clear anodized aluminum alloy frame.without screw, corner connection on the solar panel.6 holes on the frame can be installed easily.
l Junction box: Multi function junction box with water proof.
l Long life time: >=25 years; less power decrease.
l Good performance of preventing from atrocious weather such as wind and hails.
l Resisting moisture and etching effectively, not effect by geology.

Model:MS-P-180W
Module:
Factory: ISO9001
Maximum Power (Pmax):
Weight:15.5kg
Power Tolerance: +- 3%
Maximum Power Voltage (Vmpp) :23.04V
Maximum Power Current (Impp):7.82A
Open Circuit Voltage(Voc):28.80V
Short Circuit Current (Isc):8.22A
Maximum system voltage (V) :1000
Temperature coefficients of Isc (%):+ (0.065±0.015)%/
o
C
Temperature coefficients of Voc (%) :-(90±5)mV/
o
C
Temperature coefficients of Pm (%): -(0.5±0.05)%/
o
C
Temperature coefficients of Im (%):+0.1/
o
C
Temperature coefficients of Vm (%):-0.38/
o
C
Temperature Range:-40
o
C+80
o
C
Tolerance Wattage (e.g. +/-3%):+/-5%
Surface Maximum Load Capacity:60m/s(200kg/sq.m)
Length of Cables (mm):900mm
Cell Efficiency (%):≥15.5%
Output tolerance (%):+/-5%
Frame (Material, Corners, etc.) :Aluminum
Standard Test Conditions:AM1.5 100mW/cm2 25
o
C

P3354 solar panel

output: even in the dim light of the circumstances, 15% efficiency of monocrystalline battery cell can also output electricpower
Macro-Solar is a manufacturer of mono& poly solar panel and other solar application products. We can offer you both mono and poly PV module from 0.01W to 280W.Macro-Solar is specialized in producing mono& poly laminated solar panels and epoxy solar panels with all size, we also have R&D department in order to research new technology of solar panels and devote to satisfy customers demand. Here all kind of customers solar panels be welcome.

Our solar panels are designed for large electrical power requirements. We provide 2 years Full warranty on the material and workmanship, and a performance warranty of 90% of the minimal rated power output(Pmpp+/-5%)during the first ten years and 80% during twenty-five years. Ideal for grid-connected and remote power systems, PV modules offer high usable power per square foot of solar array.

*Solar cell: High efficiency crystalline solar cell 15.5%. Even if under the weak light, the solar panel can produce maximum power output.
*Tempered glass: Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of PV modules.
*Using EVA and TPT to prevent destroying and water.
l Frame: Without screw, corner connection on the solar panel.6 holes on the frame can be installed easily.
l Junction box: Multi function junction box with water proof.
l Long life time: >=25 years; less power decrease.
l Good performance of preventing from atrocious weather such as wind and hails.
Resisting moisture and etching effectively, not effect by geology.
Dear sir,we know you are a quality client,so we want to establish a long

P3355 solar panel

(150w)Monocrystalline Solar Panel

A.Efficiency:>15.6
B.Materials:monocrystalline solar cells
C.Certification:CE, ISO
D.Size:805*1300*35mm
Parameter (150W)
Specifications:
Orientation: 6×10
No. of Cells (PC) : 60
Module Net Weight (KG): >9.5
Size of Module (MM): 805*1300*35
Limits:
Maximum System Voltage (V): 1000
Operating temperature: -40
o
C---+85
o
C
Warranty:
2 years for the whole product, 90% power for10 years, 80% power for 25 years.
Packing:
carton and foam, add wooden box
Characteristics:
Optimum Operating Voltage(V): 30
Optimum Operating Current (A): 5.00
Open Circuit Voltage (V): 36.6
Short Circuit Current(A) : 5.4
FF (%): >=73.3%
Cell Efficiency (%): 16%
Coefficients of coefficients:
Temperature Coefficients of Isc(%): +0.1%/
o
C
Temperature Coefficients of Voc(%): -0.38%/
o
C
Temperature Coefficients of Pm(%): -0.47%/
o
C
Temperature Coefficients of Im(%): +0.1%/
o
C
Temperature coefficients of Vm(%): -0.38%/
o
C
Other details:
Frame (Material, Corners, etc.): Anodized Aluminum Ally
Temperature Range: -40
o
C---+85
o
C
Tolerance Wattage (e.g.±5%): ±5%
Surface Maximum load capacity: 60m/s(200kg/sq.m)
Junction Box Type: PPO, black

120W mono Solar Panel

mono-crystalline Silicon Solar Cell,
Solar Panel
pv Solar Panel
Solar Cell: monocrystalline Sillicone 156*156mm
No. Of cells and connections:4*9=36pcs
Dimension of module: 148*67*3.0cm
Weight: 13.5kgs
Warranty: PM is not less than 90% in 10years and 80% in 20years.
Resistances:227g stell ball fall down from 1.0meter hight and 60m/x wind.
Maximum Power (Pm) : 120W
Voltage at max Power(vmp): 17.4V
Current at max power(Imp) : 6.89A
Open circuit voltage(voc) : 21.6V
Short circuit current(isc) : 7.58A
Maximum System Voltage: 1000V DC
Operating Temperature: -40celsius to + 85celsius
Maximum Series Fuse Rating: 12A
Standard Test Condition: Irrandiance 1000W/m2, Module temperatture 25 celsius, AM=1.5
Certificate: CE

P3362 solar panel

P3370 solar panel

P3371 solar panel

P3378 solar panel

P3379 solar panel

Competitive price
*Adhere strickly to ISO quality control
*25years 80% output power guarantee
Macro-Solar is a manufacturer of mono& poly solar panel and other solar application products. We can offer you both mono and poly PV module from 0.01W to 280W.Macro-Solar is specialized in producing mono& poly laminated solar panels and epoxy solar panels with all size, we also have R&D department in order to research new technology of solar panels and devote to satisfy customers demand. Here all kind of customers solar panels be welcome.
Our solar panels are designed for large electrical power requirements.

We provide 2 years Full warranty on the material and workmanship, and a performance warranty of 90% of the minimal rated power output(Pmpp+/-5%)during the first ten years and 80% during twenty-five years.

Ideal for grid-connected and remote power systems, PV modules offer high usable power per square foot of solar array.

*Solar cell:
High efficiency crystalline solar cell 15.5%. Even if under the weak light, the solar panel can produce maximum power output.
*Tempered glass:
Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of PV modules.
*Using EVA and TPT to prevent destroying and water.
l Frame: Clear anodized aluminum alloy frame.without screw, corner connection on the solar panel.6 holes on the frame can be installed easily.
l Junction box: Multi function junction box with water proof.
l Long life time: >=25 years; less power decrease.
l Good performance of preventing from atrocious weather such as wind and hails.
l Resisting moisture and etching effectively, not effect by geology.

Model:MS-P-180W
Module:
Factory: ISO9001
Maximum Power (Pmax):
Weight:15.5kg
Power Tolerance: +- 3%
Maximum Power Voltage (Vmpp) :23.04V
Maximum Power Current (Impp):7.82A
Open Circuit Voltage(Voc):28.80V
Short Circuit Current (Isc):8.22A
Maximum system voltage (V) :1000
Temperature coefficients of Isc (%):+ (0.065±0.015)%/
o
C
Temperature coefficients of Voc (%) :-(90±5)mV/
o
C
Temperature coefficients of Pm (%): -(0.5±0.05)%/
o
C
Temperature coefficients of Im (%):+0.1/
o
C
Temperature coefficients of Vm (%):-0.38/
o
C
Temperature Range:-40
o
C+80
o
C
Tolerance Wattage (e.g. +/-3%):+/-5%
Surface Maximum Load Capacity:60m/s(200kg/sq.m)
Length of Cables (mm):900mm
Cell Efficiency (%):≥15.5%
Output tolerance (%):+/-5%
Frame (Material, Corners, etc.) :Aluminum
Standard Test Conditions:AM1.5 100mW/cm2 25
o
C

P3381 solar panel

P3382 solar panel

Competitive price ,good looks and top quality
*Adhere strickly to ISO quality control
*25year warranty
Macro-Solar is a manufacturer of mono& poly solar panel and other solar application products. We can offer you both mono and poly PV module from 0.01W to 280W.Macro-Solar is specialized in producing mono& poly laminated solar panels and epoxy solar panels with all size, we also have R&D department in order to research new technology of solar panels and devote to satisfy customers demand. Here all kind of customers solar panels be welcome.
Our solar panels are designed for large electrical power requirements.

We provide 2 years Full warranty on the material and workmanship, and a performance warranty of 90% of the minimal rated power output(Pmpp+/-5%)during the first ten years and 80% during twenty-five years.

Ideal for grid-connected and remote power systems, PV modules offer high usable power per square foot of solar array.

*Solar cell:
High efficiency crystalline solar cell 15.5%. Even if under the weak light, the solar panel can produce maximum power output.
*Tempered glass:
Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of PV modules.
*Using EVA and TPT to prevent destroying and water.
l Frame: Clear anodized aluminum alloy frame.without screw, corner connection on the solar panel.6 holes on the frame can be installed easily.
l Junction box: Multi function junction box with water proof.
l Long life time: >=25 years; less power decrease.
l Good performance of preventing from atrocious weather such as wind and hails.
l Resisting moisture and etching effectively, not effect by geology.

Model:MS-P-180W
Module:
Factory: ISO9001
Maximum Power (Pmax):
Weight:15.5kg
Power Tolerance: +- 3%
Maximum Power Voltage (Vmpp) :23.04V
Maximum Power Current (Impp):7.82A
Open Circuit Voltage(Voc):28.80V
Short Circuit Current (Isc):8.22A
Maximum system voltage (V) :1000
Temperature coefficients of Isc (%):+ (0.065±0.015)%/
o
C
Temperature coefficients of Voc (%) :-(90±5)mV/
o
C
Temperature coefficients of Pm (%): -(0.5±0.05)%/
o
C
Temperature coefficients of Im (%):+0.1/
o
C
Temperature coefficients of Vm (%):-0.38/
o
C
Temperature Range:-40
o
C+80
o
C
Tolerance Wattage (e.g. +/-3%):+/-5%
Surface Maximum Load Capacity:60m/s(200kg/sq.m)
Length of Cables (mm):900mm
Cell Efficiency (%):≥15.5%
Output tolerance (%):+/-5%
Frame (Material, Corners, etc.) :Aluminum
Standard Test Conditions:AM1.5 100mW/cm2 25
o
C

P3390 solar panel

P3391 solar panel

120W mono solar panel with class-A mono 125 cell &Best-selling and Preferential price!

1.Efficiency, long lifetime, easily install.
2.High quality productwarranty for 20 years.
3.Certifcates: CE, IEC61215
Parameters of 120W monocrystalline silicon solar cell panels

Model
Unit
Model
120W
Basic
Parameters
Rated power
W
120W
Storage and operating temperature
Deg C
-40°C to +80°C
Testing standards

1000W/M²,1.5AM,25°C
Dimensions (L * W * H)
mm
1200*808*35
Weight
kg
13.5kg
Cell parameters
Cell Type

Monocrystalline
Area
mm
2
125*125
Number of cells (series)

54(6*9)
Maximum power
W
120
Output power tolerance
%
+/-3
Voltage and current parameters
Maximum system voltage
Volts
1000
Optimum power voltage
(Vmp)
Volts
25.9
Optimum power current
(Imp)
Amps
4.83
Open circuit voltage
(Voc)
Volts
32.8
Short circuit current
(Isc)
Amps
5.24
Temperature coefficient
Auxiliary material parameters (passed by CE and TUV certification)
junction box
Protection class

IP65
Length
M
0.9
Diameter
mm
2
0.4
Frame

Aluminum alloy, anodized
Glass
Thickness
mm
3.2
Low iron, high transmittance, steel

YES
EVA glue
mm
0.5
Rear panel(TPT)
mm
0.3
Warranty
10 years
%
90
20 - 25 years
%
80
Warranty period
Year
1
Bitmap
Features and advantages

Attractive appearance, high conversion efficiency
Excellent low-light effect
High-transmittance high-quality toughened glass
Unique and advanced technology makes the component performance excellent
Solid and beautiful framework is anti-snow
Advanced packaging technology can prevent water seepage and deformation
Designed according to customer demands

P3392 solar panel

P3393 solar panel

P3395 solar panel

P3399 solar panel

Competitive price
*Adhere strickly to ISO quality control
*25year warranty
Macro-Solar is a manufacturer of mono& poly solar panel and other solar application products. We can offer you both mono and poly PV module from 0.01W to 280W.Macro-Solar is specialized in producing mono& poly laminated solar panels and epoxy solar panels with all size, we also have R&D department in order to research new technology of solar panels and devote to satisfy customers demand. Here all kind of customers solar panels be welcome.
Our solar panels are designed for large electrical power requirements.

We provide 2 years Full warranty on the material and workmanship, and a performance warranty of 90% of the minimal rated power output(Pmpp+/-5%)during the first ten years and 80% during twenty-five years.

Ideal for grid-connected and remote power systems, PV modules offer high usable power per square foot of solar array.

*Solar cell:
High efficiency crystalline solar cell 15.5%. Even if under the weak light, the solar panel can produce maximum power output.
*Tempered glass:
Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of PV modules.
*Using EVA and TPT to prevent destroying and water.
l Frame: Clear anodized aluminum alloy frame.without screw, corner connection on the solar panel.6 holes on the frame can be installed easily.
l Junction box: Multi function junction box with water proof.
l Long life time: >=25 years; less power decrease.
l Good performance of preventing from atrocious weather such as wind and hails.
l Resisting moisture and etching effectively, not effect by geology.

Model:MS-P-180W
Module:
Factory: ISO9001
Maximum Power (Pmax):180W
Weight:15.5kg
Power Tolerance: +- 3%
Maximum Power Voltage (Vmpp) :23.04V
Maximum Power Current (Impp):7.82A
Open Circuit Voltage(Voc):28.80V
Short Circuit Current (Isc):8.22A
Maximum system voltage (V) :1000
Temperature coefficients of Isc (%):+ (0.065±0.015)%/
o
C
Temperature coefficients of Voc (%) :-(90±5)mV/
o
C
Temperature coefficients of Pm (%): -(0.5±0.05)%/
o
C
Temperature coefficients of Im (%):+0.1/
o
C
Temperature coefficients of Vm (%):-0.38/
o
C
Temperature Range:-40
o
C+80
o
C
Tolerance Wattage (e.g. +/-3%):+/-5%
Surface Maximum Load Capacity:60m/s(200kg/sq.m)
Length of Cables (mm):900mm
Cell Efficiency (%):≥15.5%
Output tolerance (%):+/-5%
Frame (Material, Corners, etc.) :Aluminum
Standard Test Conditions:AM1.5 100mW/cm2 25
o
C

P3400 solar panel

Competitive price
*Adhere strickly to ISO quality control
*25year warranty
Macro-Solar is a manufacturer of mono& poly solar panel and other solar application products. We can offer you both mono and poly PV module from 0.01W to 280W.Macro-Solar is specialized in producing mono& poly laminated solar panels and epoxy solar panels with all size, we also have R&D department in order to research new technology of solar panels and devote to satisfy customers demand. Here all kind of customers solar panels be welcome.
Our solar panels are designed for large electrical power requirements.

We provide 2 years Full warranty on the material and workmanship, and a performance warranty of 90% of the minimal rated power output(Pmpp+/-5%)during the first ten years and 80% during twenty-five years.

Ideal for grid-connected and remote power systems, PV modules offer high usable power per square foot of solar array.

*Solar cell:
High efficiency crystalline solar cell 15.5%. Even if under the weak light, the solar panel can produce maximum power output.
*Tempered glass:
Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of PV modules.
*Using EVA and TPT to prevent destroying and water.
l Frame: Clear anodized aluminum alloy frame.without screw, corner connection on the solar panel.6 holes on the frame can be installed easily.
l Junction box: Multi function junction box with water proof.
l Long life time: >=25 years; less power decrease.
l Good performance of preventing from atrocious weather such as wind and hails.
l Resisting moisture and etching effectively, not effect by geology.

Model:MS-P-180W
Module:
Factory: ISO9001
Maximum Power (Pmax): 180W
Weight:15.5kg
Power Tolerance: +- 3%
Maximum Power Voltage (Vmpp) :23.04V
Maximum Power Current (Impp):7.82A
Open Circuit Voltage(Voc):28.80V
Short Circuit Current (Isc):8.22A
Maximum system voltage (V) :1000
Temperature coefficients of Isc (%):+ (0.065±0.015)%/
o
C
Temperature coefficients of Voc (%) :-(90±5)mV/
o
C
Temperature coefficients of Pm (%): -(0.5±0.05)%/
o
C
Temperature coefficients of Im (%):+0.1/
o
C
Temperature coefficients of Vm (%):-0.38/
o
C
Temperature Range:-40
o
C+80
o
C
Tolerance Wattage (e.g. +/-3%):+/-5%
Surface Maximum Load Capacity:60m/s(200kg/sq.m)
Length of Cables (mm):900mm
Cell Efficiency (%):≥15.5%
Output tolerance (%):+/-5%
Frame (Material, Corners, etc.) :Aluminum
Standard Test Conditions:AM1.5 100mW/cm2 25
o
C

P3403 solar panel

Competitive price
*Adhere strickly to ISO quality control
*25year warranty
Macro-Solar is a manufacturer of mono& poly solar panel and other solar application products. We can offer you both mono and poly PV module from 0.01W to 280W.Macro-Solar is specialized in producing mono& poly laminated solar panels and epoxy solar panels with all size, we also have R&D department in order to research new technology of solar panels and devote to satisfy customers demand. Here all kind of customers solar panels be welcome.
Our solar panels are designed for large electrical power requirements.

We provide 2 years Full warranty on the material and workmanship, and a performance warranty of 90% of the minimal rated power output(Pmpp+/-5%)during the first ten years and 80% during twenty-five years.

Ideal for grid-connected and remote power systems, PV modules offer high usable power per square foot of solar array.

*Solar cell:
High efficiency crystalline solar cell 15.5%. Even if under the weak light, the solar panel can produce maximum power output.
*Tempered glass:
Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of PV modules.
*Using EVA and TPT to prevent destroying and water.
l Frame: Clear anodized aluminum alloy frame.without screw, corner connection on the solar panel.6 holes on the frame can be installed easily.
l Junction box: Multi function junction box with water proof.
l Long life time: >=25 years; less power decrease.
l Good performance of preventing from atrocious weather such as wind and hails.
l Resisting moisture and etching effectively, not effect by geology.

Model:MS-P-180W
Module:
Factory: ISO9001
Maximum Power (Pmax):180W
Weight:15.5kg
Power Tolerance: +- 3%
Maximum Power Voltage (Vmpp) :23.04V
Maximum Power Current (Impp):7.82A
Open Circuit Voltage(Voc):28.80V
Short Circuit Current (Isc):8.22A
Maximum system voltage (V) :1000
Temperature coefficients of Isc (%):+ (0.065±0.015)%/
o
C
Temperature coefficients of Voc (%) :-(90±5)mV/
o
C
Temperature coefficients of Pm (%): -(0.5±0.05)%/
o
C
Temperature coefficients of Im (%):+0.1/
o
C
Temperature coefficients of Vm (%):-0.38/
o
C
Temperature Range:-40
o
C+80
o
C
Tolerance Wattage (e.g. +/-3%):+/-5%
Surface Maximum Load Capacity:60m/s(200kg/sq.m)
Length of Cables (mm):900mm
Cell Efficiency (%):≥15.5%
Output tolerance (%):+/-5%
Frame (Material, Corners, etc.) :Aluminum
Standard Test Conditions:AM1.5 100mW/cm2 25
o
C

P3414 solar panel

Friday, July 22, 2011

P3416 solar panel

P3417 solar panel

P3444 solar panel

120W mono solar panel

120W mono solar panel
Anti-reflective solar glass

Sunbloomm solar modules use a textured cell
surface and tempered glass for solar use to
reduce reflection of sunlight. n anti-reflective
coating provides a unifm blue color and increases
the absorption of light in all weather conditions.

Long se rvice life

Sunbloomm solar paels will last for at least 25 years.
5 years warranty on material and workmanship
and guarantee their output at 90% after 10 years
and 80% after 25 years.

Excellent construction

Sunbloomm solar panels have been encapsulated
with the greatest care: they resist corrosion
caused by rain, water and gas. Their anti-shocking
performance makes them resist hail and work
under atrocious weather conditions where
temperature changes quickly.

P3454 solar panel

Competitive price
*Adhere strickly to ISO quality control
*25year warranty
Macro-Solar is a manufacturer of mono& poly solar panel and other solar application products. We can offer you both mono and poly PV module from 0.01W to 280W.Macro-Solar is specialized in producing mono& poly laminated solar panels and epoxy solar panels with all size, we also have R&D department in order to research new technology of solar panels and devote to satisfy customers demand. Here all kind of customers solar panels be welcome.
Our solar panels are designed for large electrical power requirements.

We provide 2 years Full warranty on the material and workmanship, and a performance warranty of 90% of the minimal rated power output(Pmpp+/-5%)during the first ten years and 80% during twenty-five years.

Ideal for grid-connected and remote power systems, PV modules offer high usable power per square foot of solar array.

*Solar cell:
High efficiency crystalline solar cell 15.5%. Even if under the weak light, the solar panel can produce maximum power output.
*Tempered glass:
Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of PV modules.
*Using EVA and TPT to prevent destroying and water.
l Frame: Clear anodized aluminum alloy frame.without screw, corner connection on the solar panel.6 holes on the frame can be installed easily.
l Junction box: Multi function junction box with water proof.
l Long life time: >=25 years; less power decrease.
l Good performance of preventing from atrocious weather such as wind and hails.
l Resisting moisture and etching effectively, not effect by geology.

Model:MS-P-180W
Module:
Factory: ISO9001
Maximum Power (Pmax):180W
Weight:15.5kg
Power Tolerance: +- 3%
Maximum Power Voltage (Vmpp) :23.04V
Maximum Power Current (Impp):7.82A
Open Circuit Voltage(Voc):28.80V
Short Circuit Current (Isc):8.22A
Maximum system voltage (V) :1000
Temperature coefficients of Isc (%):+ (0.065±0.015)%/
o
C
Temperature coefficients of Voc (%) :-(90±5)mV/
o
C
Temperature coefficients of Pm (%): -(0.5±0.05)%/
o
C
Temperature coefficients of Im (%):+0.1/
o
C
Temperature coefficients of Vm (%):-0.38/
o
C
Temperature Range:-40
o
C+80
o
C
Tolerance Wattage (e.g. +/-3%):+/-5%
Surface Maximum Load Capacity:60m/s(200kg/sq.m)
Length of Cables (mm):900mm
Cell Efficiency (%):≥15.5%
Output tolerance (%):+/-5%
Frame (Material, Corners, etc.) :Aluminum
Standard Test Conditions:AM1.5 100mW/cm2 25
o
C

P5W SOLAR PANEL

P5W SOLAR PANEL
Long life span solar panel
CE RoSH certificate solar panel
Maximum power:5W panel
Cell size:6.94*125mm
Polycrystal PV Module
Model NO:CN-DC02, P5W
Electrical charcteristics
Maximum power:5W
Power tolerance:±3%
Optimum operation voltage:17.2Vm(V)
Optimum operation current:0.291Im(A)
Open circuit voltage:21.6Voc(V)
Short circuit current:0.32Isc(A)
Maximum system voltage:900(VDC)
Cell efficiency:16.8%
Module efficiency:10.4%
Cell Qty,type,arrangement:36pcs mono crystalline cell(2*18)
Cell size:6.94*125mm
Bypass diade:1pcs
Temp. coefficient power:-0.45(%/°C)
Temp. coefficient Voc:0.05(%/°C)
Temp. coeffieient Isc:-0.35(%/°C)
Nominal Operating cell temp.:47±2°C
Standard test condition:1000Wsq.m,25°C,AM1.5
Mechanical characteristics:
Size:282*189*18mm
Junction box:VI/VII
Weight:0.6kg
Glass:High transmission of light, low iron, tempred glass
Packing means:
Qty/CTN:20pcs
Ctn box size:300*385*215mm
Absolute maximum ratings:
Dielectric isolation voltage:2000MAX(VDC)
Operating temperature:-40--+85°C
Strorage temperature:-40--+85°C
Maximum wind resistance:60(m/s)
Maximum hail diameter @80Km/h:25mm
Maximum load capacity:200(kg/m)
Quality guarantee:
5 years guarantee, output power 90% in 10 years,80% in 25 years.

PET Laminated Solar Panel

Vmp:34.56V Imp:90mA
Voc:40.00V Isc:100mA
Model No.:SZGD250140-72M
Pmax:3.24W
Dimesnion:250mmx140mmx2.5mm
PET Lamination
Solar cell:Monocrysalline solar cell,
72pcs of solar cell bar in series
Efficiency:>15.0%
Vmp:34.56V Imp:90mA
Voc:40.00V Isc:100mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:11.52V Imp:35mA
Voc:13.20V Isc:40mA
Model No.:SZGD20023-24P
Pmax:0.4W
Dimesnion:200mmx23mmx2.5mm
PET Lamination
Solar cell:Polycrysalline solar cell,
24pcs of solar cell bar in series
Efficiency:>15.0%
Vmp:11.52V Imp:35mA
Voc:13.20V Isc:40mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:17.28V Imp:140mA
Voc:19.80V Isc:155mA
Model No.:SZGD230163-36P
Pmax:2.5W
Dimesnion:230mmx163mmx2.5mm
PET Lamination
Solar cell:Polycrysalline solar cell,
36pcs of solar cell bar in series
Efficiency:>15.0%
Vmp:17.28V Imp:140mA
Voc:19.80V Isc:155mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:4.80V Imp:200mA
Voc:5.50V Isc:220mA
Model No.:SZGD105105-10P
Pmax:1W
Dimesnion:105mmx105mmx2.5mm
PET Lamination
Solar cell:Polycrysalline solar cell,
10pcs of solar cell bar in series
Efficiency:>15.0%
Vmp:4.80V Imp:200mA
Voc:5.50V Isc:220mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:1.92V Imp:280mA
Voc:2.20V Isc:305mA
Model No.:SZGD8065-4P
Pmax:0.56W
Dimesnion:80mmx65mmx2.5mm
PET Lamination
Solar cell:Polycrysalline solar cell,
4pcs of solar cell bar in series
Efficiency:>15.0%
Vmp:1.92V Imp:280mA
Voc:2.20V Isc:305mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:2.88V Imp:300mA
Voc:3.30V Isc:330mA
Model No.:SZGD12060-3P
Pmax:0.9W
Dimension:120mmx60mmx2.5mm
PET Lamination
Solar cell: Polycrystalline solar cell
3pcs of solar cell bar in series.
Efficiency:>15.0%
Vmp:2.88V Imp:300mA
Voc:3.30V Isc:330mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:16.32V Imp:160mA
Voc:18.70V Isc:175mA
Model No.:SZGDDIA260-34P
Pmax:2.75W
Dimension:DIA260mmx2.5mm
Dimension for the hole:110mmx90mm
PET Lamination
Solar cell: Polycrystalline solar cell
34pcs of solar cell bar in series.
Efficiency:>15.0%
Vmp:16.32V Imp:160mA
Voc:18.70V Isc:175mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:7.68V Imp:430mA
Voc:8.80V Isc:475mA
Model No.:SZGD245140-16P
Pmax:3.44W
Dimesnion:245mmx140mmx2.5mm
PET Lamination
Solar cell:Polycrysalline solar cell,
16pcs of solar cell bar in series
Efficiency:>15.0%
Vmp:7.68V Imp:430mA
Voc:8.80V Isc:475mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

120W mono solar panel

120W mono solar panel
Anti-reflective solar glass

Sunbloomm solar modules use a textured cell
surface and tempered glass for solar use to
reduce reflection of sunlight. n anti-reflective
coating provides a uniform blue color and increases
the absorption of light in all weather conditions.

Long se rvice life

Sunbloomm solar paels will last for at least 25 years.
5 years warran on material and workmanship
and guarantee their output at 90% after 10 years
and 80% after 25 years.

Excellent construction

Sunbloomm solar panels have been encapsulated
with the greatest care: they resist corrosion
caused by rain, water and gas. Their anti-shocking
performance makes them resist hail and work
under atrocious weather conditions where
temperature changes quickly.

PET Laminated Solar Panel

Vmp:4.8V Imp:190mA
Voc:5.5V Isc:200mA
Model No.:SZGD14568-10P
Pmax:0.95W
Dimension:145mmx68mmx2.5mm
PET Lamination
Solar cell: Polycrystalline solar cell
10pcs of solar cell bar in series.
Efficiency:>15.0%
Vmp:4.8V Imp:190mA
Voc:5.5V Isc:200mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:11.52V Imp:210mA
Voc:13.20V Isc:230mA
Model No.:SZGD202102-24P
Pmax:2.5W
Dimension:202mmx102mmx2.5mm
PET Lamination
Solar cell: Polycrystalline solar cell
24pcs of solar cell bar in series.
Efficiency:>15.0%
Vmp:11.52V Imp:210mA
Voc:13.20V Isc:230mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:3.84V Imp:150mA
Voc:4.40V Isc:1650mA
Model No.:SZGD9261-8P
Pmax:0.6W
Dimension:60mmx60mmx2.5mm
PET laminated.
Solar cell: Polycrystalline solar cell
8pcs of solar cell bar in series.
Efficiency: over 15.0%
Vmp:3.84V Imp:150mA
Voc:4.40V Isc:1650mA
Warranty: nominal power keep more than 90% in 1 year

PET Laminated Solar Panel

Vmp:2.88V Imp:360mA
Voc:3.30V Isc:400mA
Model No.:SZGD15558-6P
Pmax:1.08W
Dimesnion:155mmx58mmx2.5mm
PET Lamination
Solar cell:Polycrysalline solar cell,
6pcs of solar cell bar in series
Efficiency:>15.0%
Vmp:2.88V Imp:360mA
Voc:3.30V Isc:400mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Laminated Solar Panel

Vmp:17.28V Imp:230mA
Voc:19.80V Isc:255mA
Model No.:SZGD260140-36P
Pmax:4.14W
Dimesnion:260mmx140mmx2.5mm
PET Lamination
Solar cell:Polycrysalline solar cell,
36pcs of solar cell bar in series
Efficiency:>15.0%
Vmp:17.28V Imp:230mA
Voc:19.80V Isc:255mA
Test condition: 1kW/sqm, AM1.5, 25°C
Warranty: nominal power keep more than 90% in 5 years

PET Solar Panel

SBP132132 PET Solar Panel
1. Made of efficient poly solar cells
2. Stable output
3. Light weight
4. Good price for your
1.5W PET Solar Panel, Made of Efficient Poly Solar Cells

Description & Features
1. 12pcs solar cells in series connection to get a max output power of 1.5W and max voltage of 6V;
2. The solar cells are well encapsulated in fine quality PET material to ensure a good performance, water-proof and less subject to fracture;
3. This solar panel is mainly applied in solar lights and other solar application products;
4. The panel is light-weighted and easy to connect and use.
Description & Features
1. 12pcs solar cells in series connection to get a max output power of 1
.
5W and max voltage of 6V;
2. The solar cells are well encapsulated in fine quality PET material to ensure a good performance, water-proof and less subject to fracture;
3. This solar panel is mainly applied in solar lights and other solar application products;
4. The panel is light-weighted and easy to connect and use.

Specification
Max Output Power
1.5W
Max Output Voltage
6V
Max Output Current
250mA
Open Circuit Voltage
7.1V
Short Circuit Current
270mA
Dimension
132mm(Length)*132mm(Width)

This mini solar panel can charge 1.2V-12.0V battery,
widely applied in solar lights, solar chargers, solar toys, and etc...

For any more information, please feel free to leave us a message.

PET Solar Panel

PET Solar Panel
PET Laminated Solar Panel
Laminated Solar Panel
Brand: MARS ROCK SOLAR, CHINA
PET solar panel
PET Laminated Solar Panel
Laminated Solar Panel

Material:
High efficiency monocrystalline/polycrystalline silicon solar panel
Packing:
PET Laminating
PCB Material
: Insulative, environmental and anti-distorted chipboard and fiberboard
Power Scope:
0.05W10W, 0.536V, 251000mA
Duration:
60000hours day and night.
Test Condition:
outdoor: AM1.5 /1000W/M²/25

PET Laminated Solar Panel Specification List
Size (mm)
Working Voltage (V)
Working Current (A )
Peak Value(w)
145 × 200 × 25mm
17.5V
0.171A
3W
180 ×290 ×25mm
17.5V
0.285A
5W
358 ×282 ×25mm
17.5V
0.57A
10W
358 ×498 ×25mm
17.5V
1.16 A
20W
358 ×714 ×25mm
17.5V
1.73 A
30W
670 ×498 ×25mm
17.5V
2.31 A
40W
670 ×606 ×25mm
17.5V
2.89 A
50W
1088 ×670 ×33mm
17.5 V
5.78 A
100W
986 ×1230 ×50mm
36V
4.18 A
160W
986 ×1378 ×50mm
36V
5.01 A
180W
990 ×1520 ×50mm
36V
5.56 A
200W

PET solar panel

1:mini solar power
2:Sealed with epoxy resin
1:product name :YSE67 Epoxy solar panel

2:maximum power :0.28W

3:Dimension:Dim70mmx2.5mm

4:Solar cell: Poly-crystalline solar cell (4 pcs of solar cell bar in series)

5:Efficiency:>15%

6:Max power voltage:4V

7:open circuit voltage:4.4v

8:Max power current:70mA

9:short circuit current:75mA

10:warranty:power keep more than 90% in 1year

POLY CRYSTALLINE SILICON SOLAR PANEL

SOLAR PANEL
GOOD QUALITY AND BEST PRICE
EASE FOR OPERATION
LIMITED WARRANTY:30YEARS
WORKS IN ALL WEATHER CONDITIONS
MAXIMUM POWER(WP)
180W
MAXIMUM POWER VOLTAGE(V)
36.02V
MAXIMUM POWER CURRENT(A)
4.98A
OPEN CIRCUIT VOLTAGE(V)
38.20V
SHORT CIRCUIT CURRENT(A)
5.23A
SIZE OF MODULE(MM)
1485X980X35MM
TEMPERATURE COEFFICIENTS OF ISC(%)
0.065+/-0.015%/°c
TEMPERATURE COEFFICIENTS OF VOC(%)
-(2.23+/-0.1)mv/°c
TEMPERATURE COEFFICIENTS OF PM(%)
-(0.5+-0.05)/°c
TEMPERATURE COEFFICIENTS OF IM(%)
+0.1/°c
TEMPERATURE COEFFICIENTS OF VM(%)
-0.38/°c
TOLERANCE WATTAGE
+/-5%
SURFACE MAXIMUM LOAD CAPACITY
60M/S(200KG/SQ.M)
CELL EFFICIENCY(%)
>16.5%
MODULE EFFICIENCY(%)
>15%
OUTPUT TOLERANCE(%)
+/-5%
FRAME
ALUMINUM
STANDARD TEST CONDITIONS
AM1.5 100MW/cm² 25°c
FF(%)
72%
OPERATING TEMPERATURE
-40°c˜85°c

POLY SOLAR CELL PV SYSTEM(Re: The best price for solar panels(IEC,TUV,UL,CE,ISO))

3 years workmanship and 90% 10years, 80%-26years power warranty
Warranty
3 years workmanship and 90%-10years,80%-25years power warranty,
For full details see the EUSOLAR GROUP Warranty available on request.

Specification
Cell Polycrystalline silicon solar cells
151*156
No. of cells and connection
60(10*6)
Power tolerance
±3%
Length of cables
1000mm
Weight
19.5kg
Dimension
1650*992*50mm
Packing
2pcs/ctn

STC
Operating temperature
-40~+85°C
Max. system voltage
1000VDC

Model
PLM-P200/30
PLM-P210/30
PLM-P220/30
PLM-P230/30
PLM-P240/30
Maximum power(Pmax)
200wp
210wp
220wp
230wp
240wp
Open circuit voltage( voc)
36.4V
36.6V
36.8V
36.9V
37.1V
Short circuit current (lsc)
7.63A
7.72A
8.00A
8.06A
8.17A
Voltage at pmax
29.4V
29.6V
29.8V
30.9V
31.3V
Current at pmax (lpm)
6.81A
7.10A
7.39A
7.52A
7.57A

POLY SOLAR CELL PVRe: The best price for solar panels(IEC,TUV,UL,CE,ISO)

POLY SOLAR PANEL 215-250W

1.Certificates:CE,ROHS,TUV,IEC,ISO9001:2008
2.Monocrystalline solar panel
3.Brand name:fullgreen
4.Do OEM&ODM
Mono-crystalline solar modules series:

FG270M-72---FG305M-72
Performance:

Warranty
90% power output over 10 years
80% power output over 25 years
Free from defects in materials and workmanship for 5 years
Qualification Test:
Temperature cycling range
-40°C to +85°C for 200 cycles
Damp heat test
85°C and 85 relative humidity for 1000h
Front&rear static load test(eg:wind)
2400 Pa
Front load test(eg:snow)
5400 Pa
Hailstone impact test
25 mm hail at 23 m/s from 1m distance
Typical Electrical Characteristics:
Cell type
156 x 156 MONO SOLAR CELL
Parameters
FG270M-72
FG285M-72
FG290M-72
FG300M-72
FG305M-72
Peak power pm(W)
270
285
290
300
305
Output tolerance
±3%
±3%
±3%
±3%
±3%
Open circuit voltage voc(V)
44.3
44.9
44.9
45.5
45.5
Max.power voltage vmp(V)
35.7
36.2
36.2
36.7
36.7
Max.power current Imp(A)
7.56
7.87
8.01
8.17
8.31
Short circuit current Isc(A)
8.16
8.50
8.65
8.83
8.98
Max.over-current(A)
15A
Max.system voltage(V)
1000V DC
Application class
Class A
Number of bypass diodes
3
Bypass diode rating(A)
30
Bypass diode max.junction temperature(°C)
200
Bypass diode thermal resistance(°C/w)
2.0
Current-temperature coefficient at short circuit,%/ °C
0.035
Voltage-temperature coefficient at maximum power,%/ °C
-0.34
Power-temperature coefficient at maximum power, %/ °C
-0.51
Nominal operating cell temperature(NOCT), °C
45±3
Standard test conditions
Irradiance:1000W/M2,Cell temperature: 25°C, AM:1.5
Mechanical characteristics:
Dimensions(mm)
1957 x 992 x 50
Weight(kg)
22.5kg
Mono crystalline silicon solar cells
156*156*0.19mm*72series
Output cables lengths(mm)
900
Construction
Front:high transmission 3.2mm tempered glass.Rear:white backsheet;encapsulant:EVA