full-automatic laminator for solar panel

Intelligent temperature control system
Advanced touch screen operating platform
Fully humanized operating procedure
Solar equipment Full automatic laminator for solar panel

Technical Specification

1. Operation controlling mode: manual/full automatic
2.Heating mode: oil-heating
3.Temperature control: PID intelligent temperature control
4. Temperature uniformity in working area: ≤±1.5°C
5 Temperature control accuracy: ≤±1°C
6. Temperature control range: 30°C-180°C
7. Pumping speed: 70L/s
8. Laminating time: 6-8mins (excluding curing time)
9. Operating vacuum degree: 200-20Pa
10.Exhausting time: 4-6 mins


Outer Dimension
13200×3400×1380mm
Laminating area
3600×2200mm
Weight of equipment
15.8t
Laminating height
25mm
Power
Three phase, four wire
Compressed air pressure needed
0.6-0.8 MPa
Cooling water flow needed
2 L/min
Total power of equipment
65 KW
Solar equipment Full automatic laminator for solar panel

Technical Specification

1. Operation controlling mode: manual/full automatic
2.Heating mode: oil-heating
3.Temperature control: PID intelligent temperature control
4. Temperature uniformity in working area: ≤±1.5°C
5 Temperature control accuracy: ≤±1°C
6. Temperature control range: 30°C-180°C
7. Pumping speed: 70L/s
8. Laminating time: 6-8mins (excluding curing time)
9. Operating vacuum degree: 200-20Pa
10.Exhausting time: 4-6 mins


Outer Dimension
13200×3400×1380mm
Laminating area
3600×2200mm
Weight of equipment
15.8t
Laminating height
25mm
Power
Three phase, four wire
Compressed air pressure needed
0.6-0.8 MPa
Cooling water flow needed
2 L/min
Total power of equipment
65 KW