Sunday, June 26, 2011

130W poly solar panel

130W poly solar pv panel
1)efficiency above 16%
2)lightweight, waterproof
4)certification: CE,ROHS,TUV;
5)warranty:25 years
Features:
1. High-efficiency solar cell ensures high performance of solar module and creates more power in peak hours ;
2. Anti-reflecting coating and high-transmission rate glass increases the power output and mechanical strength of solar module ;
3. Torsion and corrosion-resistant anodized frame ensures dependable performance, even through harsh weather conditions ;
4. Lightweight and pre-drilled mounting holes for easy installation ;
5. Water-resistant junction box ;
6. Designed specially to meet customer's demands for residential, commercial, and industrial use .

Maximum power [Pmax]:130W
Power tolerance:±5%
Voltage at Pmax [Vmp]:17.5V
Current at Pmax [Imp]:6.86A
Short-circuit current [Isc]:7.75A
Open-circuit voltage [Voc]:21.5V
Above Specification in standard test conditions:STC(1000W/m2,Cell temperature25,AM1.5)
Limited Warranty:25years
Maximum system voltage:1000V

Remark
1)The performance of finished solar panel can be designed by our R&D team according to your specific requirements.
2)

Contract Manufacturing: OEM Service Offered Design Service Offered Buyer Label Offered
Characteristics
GPP-230W
Maximum power(Pm)
230.0w
Power Tolerance
±5%
Voltage at max power(Vmp)
29.1V
Current at max power(Imp)
7.90A
Open circuit current(Voc)
36.2V
Short circuit current (Isc)
8.69A
Operating Temperature
-40Cto+85C
Maximum System Voltage
1000V
Maximum Series Fuse Rating
15A
Standard Test Conditon
Irrandiance 1000W/M2. Module temperature 25C,AM=1.5

Mechanical Characteristics
Solar cell
Polycrystalline silicon solar cell 156*156mm
No. of cells and connections
72=6*12 pcs
Dimension of module
1956*990*50mm
weight
25.0kg
Junction Box
Ip65 rated
Warranty
Pm is not less than 90% in 10 years and 80% in 20 years
Resistances
227g stell balll down from 1m height and 60m/s wind

Temperature Ceofficients
NOCT
48C±C
Current temperature coefficient
0.06±0.01%/K
Voltage temperature coefficient
-(78±10)MV/K
Power temperature coefficent
-(0.5±0.05)%/K

No comments:

Post a Comment