29W Thin Film Flexible Solar Panel triple junction amorphous silicon solar cell peel and stick installation

29W Thin Film Flexible Solar Panel
triple junction amorphous silicon solar cell
peel and stick installation
VMPP-7.5V
29W Thin Film Flexible Solar Panel triple junction amorphous silicon solar cell peel and stick installation

Type
PVL29 5L
Standard Test Conditions - ( 1000 W/m², AM 1.5, 25°C Cell Temperature )
Maximum Power
Pmax
(W)
29
Voltage at Pmax
Vmp
(V)
7.5
Current at Pmax
Imp
(A)
3.88
Short-circuit Current
Isc
(A)
4.8
Open-circuit Voltage
Voc
(V)
10.5
Nominal Operating Cell Temperature - ( 800 W/m², AM 1.5, 1 m/sec. wind , 46°C )
Maximum Power
Pmax
(W)
23
Voltage at Pmax
Vmp
(V)
7
Current at Pmax
Imp
(A)
3.24
Short-circuit Current
Isc
(A)
3.9
Open-circuit Voltage
Voc
(V)
9.6
Length

mm
1410
Width

mm
394
Area
A
m²
0.56
Power density unit area
ρ
p-A
W/m²
52.20
Weight
W
Kg
1.9
Power density unit weight
ρ
p-w
W/Kg
15.26
Cell Area (356×239)
A
cell
m²
0.4254
Available Area (336×239)
A
AA
m²
0.4015
Available Area Efficiency
η
AAE
%
7.22%
Module Efficiency
η
modul
%
5.2%

Advantages:
1. Flexible
V-laminates offer freedom of design to architects as they can even conform to curved surfaces and hence are meeting the increasing demand for aesthetically pleasing building integrated PV (BIPV).
2. Lightweight
Lightweight PV laminates are particularly suited for retrofitting of existing buildings or applications, where additional weight and/or wind load are critical to the statics of a building or structure.
3. No-Glass
No Glass PV-laminates in ground-mounted PV installations reduce sub-construction requirements and total system costs substantially.
4. Durable
Durable PV-products encapsulated in UV stabilized, weatherresistant polymers have proven themselves over decades under the most extreme conditions imaginable, including satellites, ocean buoys and military applications.
5. Shadow Tolerant
Shadow tolerant PV products offer higher outdoor performance in low and diffuse light conditions due to higher absorption of light in the blue wavelength range. The thin film PV Solar Panels can deliver power even when partially shaded or soiled.
6. High Temperature Performance
Thin Film Flexible PV products render better energy yield at high module temperatures and in warm climates. Under real outdoor conditions, module temperature can be up to 80 celsius degree, especially if they are building integrated and directly in the sun.
At these temperatures, the thin film PV-products can yield up to 20 % more electricity compared to conventional crystalline solar modules of the same power rating.
7. More KWh-higher ROI
Thin film flexible PV products achieve higher kWh energy output per Wp installed than most
conventional crystalline products. Make the most out of your photovoltaic investment.


Features:
Easy to Install: may be adhered directly to metal roofing pans, no racking system is required, laminates and metal roofing can be installed in one step reducing installation time and costs.
No roof penetrations: laminates can be adhered directly to metal roofing, there are no penetrations to the roof deck.
Lightweight: laminates weigh less than one pound per square foot, with no point loads or increased wind loading, can be installed without costly structural roof reinforcements.
Durable: solar roofing systems using our technology have achieved wind ratings >185 MPH. Glass-free modules mean you don't have to worry about breakage due to hail or vandalism.
Flexible: laminates offer freedom of design to architects, as they can conform to curved surfaces, laminates integrate directly with the metal roofing pans, they do not detract from the appearance of the building.

Jinan Linquan Industry and Trade Group Co., Ltd
LQTRADE SERVE THE WORLD